function readOnly(count){ }
Starting November 20, the site will be set to read-only. On December 4, 2023,
forum discussions will move to the Trailblazer Community.
+ Start a Discussion
Quentin HQuentin H 

SuperBadge: Lightning Experience Specialist (Issue in Challenge #9)

Hello Trailblazers!

I'm stuck on last challenge for LEX Specialist Superbadge, and I've been trying all corrections proposed on the feeds I've found, but none of it is working, so I'm starting a new post to try to see it clearer (and maybe discuss only on last version of the SB, which seems to have evolved a lot on past 2 years)...
Existing posts I've gone through:
https://developer.salesforce.com/forums/?id=906F0000000kFtrIAE
https://developer.salesforce.com/forums/?id=906F0000000kKecIAE
https://developer.salesforce.com/forums/?id=906F0000000BXDeIAO#!/feedtype=SINGLE_QUESTION_SEARCH_RESULT&id=906F0000000kEDkIAM (it has some discussion over challenge #9 in the middle)

Maybe my problem has to do with the SB being started 2 years ago on my side, on a Trailhead Playground which I cannot access anymore. I've started over on a brand new TP, but I might have stumble on a previous steps that I didn't need to re-validate?

As many people, I'm getting the following error when trying to complete the challenge:
"Challenge Not yet complete... here's what's wrong:
The 'Opp Stage by Adventure' report does not appear to be configured correctly. Make sure it has the correct report type, groupings, filters and chart type."

So, what I'm doing:
  • Create a Report from standard "Opportunities with Adventures" Report Type
  • Name it "Opp Stage by Adventure"
  • Filter on "Product Date" from 1/12026 to 12/1/2026 (and getting results)
  • Remove filter on "stage"
  • Add a vertical-stacked bar graph named "Adventure Stage Comparison"
  • On "Adventure record Lightning page", create a tab called "Adventure comparison" and inserted my newly created graph, with label "Adventure Stage Comparison"

What I have tried already :
  • Log out/log in of sandbox & Trailhead. Also after waiting for a day.
  • Change grouping order in graph: Adventure first & Stage second // Stage first & Adventure second
  • Change y-axis from "record count" to "sum of amount"
  • Use "Product Name" standard field or created "Adventure name" which I populated with same values than Product Name
  • Change folder in which the report is in: from "Unfiled Public Report" to a created folder which I shared with all users.
  • Create the report in LEX (Lightning report or Classic report in LEX) or in Classic interface
  • Create a custom Report Type "Opportunities with Adventures", but I cannot find the fields "Adventure Name" & "Product Date" to add them
  • Check there are no other Reports with a similar name "Opp Stage by Adventure"
  • Change the My Domain setting for background color
  • Check for "paused flows" (even if I do not see the link, it was hinted as a potential problem in a thread)

Some questions I still ask myself:
  • I renamed Product object to Adventure, but I cannot rename standard fields such as Product Name or Product Date. And I see "Adventure Name" being used on screenshots in threads.
  • Shouldn't I receive an email when successfully changing My Domain settings?
  • Am I just plain crazy and missing something obvious?
  • Should I start over the whole superbadge on a brand new Trailhead Playground, and is there a way to "uncheck" previous challenges?
Any help or insight is welcome, thanks in advance!

Quentin
Best Answer chosen by Quentin H
Quentin HQuentin H
Hello guys,
I don't know what changed, but after months of being blocked and not trying anymore, I tried again today and passed... I checked all the parameters, the end date was 12/1 and changed it to 12/31. I thought I already did that before, anyway, that was the last missing part.
I hope this might helps someone, and good luck for your next Trailheads!
Quentin

All Answers

Quentin HQuentin H
Hello guys,
Still stuck here, if anyone has a hint? Did someone opened a Trailhead Case, is it worth trying in your experience?
Thanks, Quentin
Shobha JamesShobha James
Hi,
i am also stuck with the challenge..
i tried to change the chart property keeping X-axis Product name and Y-axis record count ,stack by stage .But when i save it and run , the value is chaning ..its rolling back to x-axis stage and stack by product name.. i think because of this i am getting the error:The 'Opp Stage by Adventure' report does not appear to be configured correctly. Make sure it has the correct report type, groupings, filters and chart type." Could you check you are also facing the same issue?
editing the chart propertyUser-added imageUser-added image
Shobha JamesShobha James
Hi , 
I passed the Challenge..
 Can you check the order of the grouping..it should be ProductName->Stage ..my order was wrong and as suggested in another thread i created a formula field Explorer Count (Record Count)and added it to the Report.
 
Quentin HQuentin H
Thanks for your help @Shobha, but it is still not working for me.
I do have Product Name grouping, then Stage. I also created the Explorer Count (directly on the report, not in the object manager) with simple formula "RowCount" and use it as y-axis, but that is not doing the trick apparently.
I must be missing something obvious... Is your Report saved in "Public Folder" or somewhere else?
Shobha JamesShobha James
 logout and  login again and check the challenge ..User-added image
this is my final Report
Shobha JamesShobha James
i saved  it in Public folder only
 
Quentin HQuentin H
I tried logout/login quite a few times, I've benn on this challenge for weeks... Still nothing. I guess I'll try opening a Trailhead Case, no idea if that ever helped anyone though.
sai sekhar 1sai sekhar 1
@Shobha James What is the formual for explorer count
sai sekhar 1sai sekhar 1
@Quentin H Did you find the fix? I am also facing the same issue

This is my report.
User-added image
Quentin HQuentin H
Hello guys,
I don't know what changed, but after months of being blocked and not trying anymore, I tried again today and passed... I checked all the parameters, the end date was 12/1 and changed it to 12/31. I thought I already did that before, anyway, that was the last missing part.
I hope this might helps someone, and good luck for your next Trailheads!
Quentin
This was selected as the best answer
Lakshmi Priya 42Lakshmi Priya 42
Hello Trailblazers!

I am not able to Filter on "Product Date" from 1/12026 to 12/1/2026. I am getting like "Invalid start date".

User-added image

I am not sure where I am going wrong. Please help me on this!
Yaryna GorodyskaYaryna Gorodyska
User-added imageHi guys, I`m complitely stuck doing this challenge and I see my report is not right, can you please help me to check where I`m wrong?