function readOnly(count){ }
Sign Up ›
Starting November 20, the site will be set to read-only. On December 4, 2023,
forum discussions will move to the Trailblazer Community.
Learn More

Browse by Topic
ShowAll Questionssorted byDate Posted
+ Start a Discussion
sfdcdev69sfdcdev69 

Trusted IP Ranges

Hi,

 

We have couple of IP addresses added into Trusted IP Ranges. I would like to know more information about the range that is added into that.

If Start and end address is same , I feel that it might be IP address of a single user but if there is range how will I know more about it

 

Please suggest.

 

Thanks.

 

Madhan Raja MMadhan Raja M

If you want to allow logins from a single IP address, enter the same address in both fields. For example, to allow logins from only 125.12.3.0, enter 125.12.3.0 as both the start and end addresses.

The start and end IP addresses in an IPv4 range must include no more than 33,554,432 addresses (225, a /7 CIDR block). For example, the following ranges are valid:

    0.0.0.0 to 1.255.255.255
    132.0.0.0 to 132.255.255.255
    132.0.0.0 to 133.255.255.255

However, ranges like 0.0.0.0 to 2.255.255.255 or 132.0.0.0 to 134.0.0.0 are too large.

 

Every organization will have an IP range (Check with your Operation team) Ex: If the Ip ranges is in between 132.255.255.250 to 132.255.255.255 then the IP 132.255.255.253 can access the salesforce instance without activating the system.

 

If a reply to a post answers your question or resolves your problem, please mark it as the solution to the post so that others may benefit.

 

Madhan Raja M
Santosh SSantosh S

Please check the following:

 

https://ap1.salesforce.com/help/doc/en/users_profiles_epui_login_ip_ranges_edit.htm

 

 

 

Hope that Helps