Hi folks. My HR department would like me to disable the edit icon (the yellow pencil) on each users' Chatter profile page (specifically on the "Contact" information, not necessarily for the "About Me" section). Only system administrators (or users with a particular profile) would be able to see the pencil, and edit the information in that area.
Has anyone done this before? Any ideas on how to do it? JavaScript that's read when the page loads, perhaps?
I have a page that will display a basket summary, this basket will be used on several pages showing different results based on a variable i am trying to send to the controller from the VF page. VF Page
public String prodType{get; set;}
public List<Order_Product__c> getBasketProducts() {
List<Order_Product__c> prodList = [SELECT ID, Product_Name__c, Type__c FROM Order_Product__c WHERE Type__c = :prodType];
return prodList;
}
The value of prodType is set to Cars on the VF page, and is sent to the component ok. When the controller returns the list the value is blank.
I have seen many solutions showing parameters being passed but that only seems to work as part of a submit, not on a page render. Is it possible to do it in this way I am trying?
I have seen some discussion on these problems and some solutions too, however i cannot find on the addresses my issue. I am trying to do the following <ol> <li>Item 1</li> <apex:outputPanel rendered="IF Statement"> <li>Optional item a</li> </apex:outputPanel> <li>Item 2</li> </ol>
This renders on the PDF as: Item 1 Optional item a Item 2 Whereas in html: 1. Item 1 2. Optional item a 3. Item 2
I know there is incomplete support for the pdf rendering engine but does anyone know of a workaround for this?
I am setting the following variable to be reused in calculations Below returns the error Error: Unknown property 'Cloud_Voice__cStandardController.monthly' <apex:variable value="{!12}" var="term"/> <apex:variable value="{!ROUND((Cloud_Voice__c.Total_Selected_Finance__c*(r.X12m__c/1000)/term),2)}" var="monthly"/> <apex:variable value="{!monthly*term}" var="total"/>
Changing the term back to 12 works fine: <apex:variable value="{!12}" var="term"/> <apex:variable value="{!ROUND((Cloud_Voice__c.Total_Selected_Finance__c*(r.X12m__c/1000)/12),2)}" var="monthly"/> <apex:variable value="{!monthly*term}" var="total"/>
The screen allows the user to loop through adding a product from a dropdown list. The list is populated via a dynamic choice that populates with 10 products. Each time a product is added i wanted to remove that product from the dropdown. I did this by using an assighnment and populating a variable that was then used in the filter for the dynamic choice. This works fine the first iteration, however when the next product is selected the variable no longer works in the filter. Have tried to format the variable using commas, stovepipe and Or as the sepearator but none seems to work. Is there a way to filter on multiple variables (as per normal SOQL) in a single line of the filter. as below
From reading the guides and these discussion it seems the way to create an extension is to install the base package in a DE then create the extension by referencing it.
The problem that i have when doing this is that i cannot then change any of the VF pages to add the new functionality into, is there a way around this. I have a VF page with a menu of item and i want to add the new feature into that menu.
i have created an uninstall script that looks for any scheduled jobs and then deletes them however it does not seem to be getting called as the uninstall fails as the classes have been scheduled.
I know the info says you cannot create scheduled jobs via the install/uninstall scripts but does not excluded removing them.
Anyone know if this is possible or not? If possible then is my code incorrect?
The custom_setting contains the scheduled job Ids and is populated correctly.
global class V100zUnInstall implements UnInstallHandler {
global void onUnInstall(UnInstallContext context) {
customer_setting__c b = customer_setting__c.getOrgDefaults();
try{
if (b.zSchJobMaster__c != '' && b.zSchJobMaster__c != null){
system.abortJob(b.zSchJobMaster__c);
}
} catch (Exception e){
// let it go b/c the job isn't scheduled
}
}
}
I have a visualforce page that is populated with data froma record.
I want to enable the user to view the field, update it and save.
This is the VF:
<apex:repeat value="{!Config}" var="uD">
Users will be automatically deactivated <strong><apex:outputText value="{!uD.Deactivate_After__c}"/></strong> days after the last login.<br/>
Set a new value in days <apex:inputText id="origDays" value="{!uD.Deactivate_After__c}" style="width:27px;"/>
<apex:commandButton value="Set" action="{!adduserDays}">
<apex:param id="chgDays" name="newParam" value="{!uD.Deactivate_After__c}" assignTo="{!newDays}"/>
</apex:commandButton>
</apex:repeat>
The controller:
public Decimal newDays {get;set;}
public PageReference addUserDays() {
List<V100_Control__c> userRec = [SELECT Id, Frequency__c, Deactivate_After__c, Time__c FROM V100_Control__c WHERE Id = 'a01d00000077Ayi' LIMIT 1];
system.debug('JMM newDays: ' + newDays);
//userRec[0].Deactivate_After__c = newDays;
try {
update userRec;
} catch (DMLException e) {
ApexPages.addMessage(new ApexPages.message(ApexPages.severity.ERROR,'Days could not be changed.'));
return null;
}
//ApexPages.addMessage(new ApexPages.message(ApexPages.severity.INFO,'Rule Created'));
return null;
}
The newdays field is always null.
Can anyone help with how i can allow the user to upadte this field and pass it to the controller. I cannot use a custom controller.
I am developing an app that has classes interacting with some stanrd objects; User ofr instance.
Typically when writing the test classes for this type i would create a user within the test to test against, as per SF design principals.
I am not sure how to tackle this from an managed app point of view as i could try to create a user, however the host org has a custom field that is required for that record.
Will that fail my test class and does that matter from the host org's point of view.
Will it be ignore in the managed app, or not matter somehow.
private List<SelectOption> Profiles;
public List<String> selectedProfiles {get; set;}
public String jProfile {get;set;}
public List<SelectOption> getProfiles() {
Profiles = new List<SelectOption>();
Profiles.add(new SelectOption('None', 'None'));
for (Profile rt : [Select Id, Name
From Profile
Order By Name ASC]) {
Profiles.add(new SelectOption(rt.Name, rt.Name));
}
return Profiles;
}
I have created a visualforce page on the lead object that is populated with the contacts for that account, this is to allow the user to simply select the contact they want
When the clickig save the controller tries to select that contact into the lead and save the lead:
public PageReference save()
{
List<Lead> l = [SELECT Contact__c FROM Lead WHERE Id = :LeadId LIMIT 1];
system.debug('JMM Lead: ');
l[0].Contact__c= WHATSHOULDGOHERE;//'003P000000XjK71IAF';
update l;
return new PageReference('/apex/LeadContact?'+LeadId+'&refreshPage=true');
}
I can get this work when i hard code a contact but cannot get to use the one selected in the save from the visualforce.
I have tried in the WHATSHOULDGOHERE i have tried eveything i can think off and but i'm sure i must be missing something simple.
We have a requirment to allow Dashboard elements to posted into Chatter feeds but only into a user or group feed, not into the dashboard itself.
I have written the code
for (FeedItem f : trigger.new){
fParent = f.ParentID;
if (fParent != null && fParent.startsWith('01Z')){
f.addError('You can only comment on existing posts in this group.') ;
}
}
This prevents the post into the dashboard but instead of returning the friendly error message it shows a general error in a alert window:
"An error occurred while processing your request. The salesforce.com support team has been notified of the problem. If you have additional information that may helpful for reproducing or correcting the error, please contact Salesforce Support at support@salesforce.com. Please indicate the URL of the page you requested, any error ID shown below, and any related information. We apologize for the inconvenience. Thank you again for your patience and assistance. And thanks for using salesforce.com!"
I am looking to execute some script (to add a user to a Chatter Group) when a user record is updated to any one of 10 profiles.
if (u.Profile.Name.startsWith('BTLB') ){
CollaborationGroupMember NewMember = new CollaborationGroupMember(MemberId = u.Id, CollaborationGroupId = '00ds0000001U9Ot');
AddMembers.add(NewMember);
}
This compile ok, however when i try to edit the user record I get:
Apex trigger NewUserEntries caused an unexpected exception, contact your administrator: NewUserEntries: execution of BeforeUpdate caused by: System.NullPointerException: Attempt to de-reference a null object: Trigger.NewUserEntries: line 57, column 13
Line 57 is the if statement.
Is what i am trying to do possible?
I know i use profileId or a SOQL but don't really want to list the 10 possible ID and keep them updated whenever a new profiles is added.
Starting to use related content on our opportunities and trying to find out which fields are searched.
We have created the content with relevant tags to help link it to our opportunities, however we are unsure as to what the "Find Related Content" button uses from the opportunity to find the content.
It seems to be Opp Title but not 100% sure. We would like to understand which field(s) it is and if we can change this, ie to look at the products added to the opp.
Cant find it documented anywhere so any help much appreciated.
The screen allows the user to loop through adding a product from a dropdown list. The list is populated via a dynamic choice that populates with 10 products. Each time a product is added i wanted to remove that product from the dropdown. I did this by using an assighnment and populating a variable that was then used in the filter for the dynamic choice. This works fine the first iteration, however when the next product is selected the variable no longer works in the filter. Have tried to format the variable using commas, stovepipe and Or as the sepearator but none seems to work. Is there a way to filter on multiple variables (as per normal SOQL) in a single line of the filter. as below
I have seen some discussion on these problems and some solutions too, however i cannot find on the addresses my issue. I am trying to do the following <ol> <li>Item 1</li> <apex:outputPanel rendered="IF Statement"> <li>Optional item a</li> </apex:outputPanel> <li>Item 2</li> </ol>
This renders on the PDF as: Item 1 Optional item a Item 2 Whereas in html: 1. Item 1 2. Optional item a 3. Item 2
I know there is incomplete support for the pdf rendering engine but does anyone know of a workaround for this?
I am setting the following variable to be reused in calculations Below returns the error Error: Unknown property 'Cloud_Voice__cStandardController.monthly' <apex:variable value="{!12}" var="term"/> <apex:variable value="{!ROUND((Cloud_Voice__c.Total_Selected_Finance__c*(r.X12m__c/1000)/term),2)}" var="monthly"/> <apex:variable value="{!monthly*term}" var="total"/>
Changing the term back to 12 works fine: <apex:variable value="{!12}" var="term"/> <apex:variable value="{!ROUND((Cloud_Voice__c.Total_Selected_Finance__c*(r.X12m__c/1000)/12),2)}" var="monthly"/> <apex:variable value="{!monthly*term}" var="total"/>
I am developing an app that has classes interacting with some stanrd objects; User ofr instance.
Typically when writing the test classes for this type i would create a user within the test to test against, as per SF design principals.
I am not sure how to tackle this from an managed app point of view as i could try to create a user, however the host org has a custom field that is required for that record.
Will that fail my test class and does that matter from the host org's point of view.
Will it be ignore in the managed app, or not matter somehow.
private List<SelectOption> Profiles;
public List<String> selectedProfiles {get; set;}
public String jProfile {get;set;}
public List<SelectOption> getProfiles() {
Profiles = new List<SelectOption>();
Profiles.add(new SelectOption('None', 'None'));
for (Profile rt : [Select Id, Name
From Profile
Order By Name ASC]) {
Profiles.add(new SelectOption(rt.Name, rt.Name));
}
return Profiles;
}
I have a package which creates a scheduled job using a post-install script, and saves the id in a custom settings entry. I am trying to create the equivalent uninstall script, but not having much success. The class and associated tests all perform normally when I run them in the IDE. When I run them from the Web UI however, the abortJob call doesn't delete the job and my tests fail. If I comment out the tests and do an actual install and uninstall of the package, the scheduled job is not deleted.
Any idea why this would happen? I know that the documentation indicates that uninstall scripts cannot schedule new jobs, call @future methods, etc, but it doesn't mention anything about deleting existing jobs. The same code, when part of a controller for a settings page, worked fine. Maybe I am misintepreting when the uninstall script actually runs, meaning the only option is for an admin to delete the scheduled job manually, before trying to uninstall the package?
Code snippet:
...
if(settings != null) {
try {
system.debug('Removing scheduled job with id: ' + settings.scheduled_job_id__c);
I have created a visualforce page on the lead object that is populated with the contacts for that account, this is to allow the user to simply select the contact they want
When the clickig save the controller tries to select that contact into the lead and save the lead:
public PageReference save()
{
List<Lead> l = [SELECT Contact__c FROM Lead WHERE Id = :LeadId LIMIT 1];
system.debug('JMM Lead: ');
l[0].Contact__c= WHATSHOULDGOHERE;//'003P000000XjK71IAF';
update l;
return new PageReference('/apex/LeadContact?'+LeadId+'&refreshPage=true');
}
I can get this work when i hard code a contact but cannot get to use the one selected in the save from the visualforce.
I have tried in the WHATSHOULDGOHERE i have tried eveything i can think off and but i'm sure i must be missing something simple.
We have a requirment to allow Dashboard elements to posted into Chatter feeds but only into a user or group feed, not into the dashboard itself.
I have written the code
for (FeedItem f : trigger.new){
fParent = f.ParentID;
if (fParent != null && fParent.startsWith('01Z')){
f.addError('You can only comment on existing posts in this group.') ;
}
}
This prevents the post into the dashboard but instead of returning the friendly error message it shows a general error in a alert window:
"An error occurred while processing your request. The salesforce.com support team has been notified of the problem. If you have additional information that may helpful for reproducing or correcting the error, please contact Salesforce Support at support@salesforce.com. Please indicate the URL of the page you requested, any error ID shown below, and any related information. We apologize for the inconvenience. Thank you again for your patience and assistance. And thanks for using salesforce.com!"
I am looking to execute some script (to add a user to a Chatter Group) when a user record is updated to any one of 10 profiles.
if (u.Profile.Name.startsWith('BTLB') ){
CollaborationGroupMember NewMember = new CollaborationGroupMember(MemberId = u.Id, CollaborationGroupId = '00ds0000001U9Ot');
AddMembers.add(NewMember);
}
This compile ok, however when i try to edit the user record I get:
Apex trigger NewUserEntries caused an unexpected exception, contact your administrator: NewUserEntries: execution of BeforeUpdate caused by: System.NullPointerException: Attempt to de-reference a null object: Trigger.NewUserEntries: line 57, column 13
Line 57 is the if statement.
Is what i am trying to do possible?
I know i use profileId or a SOQL but don't really want to list the 10 possible ID and keep them updated whenever a new profiles is added.
Hi folks. My HR department would like me to disable the edit icon (the yellow pencil) on each users' Chatter profile page (specifically on the "Contact" information, not necessarily for the "About Me" section). Only system administrators (or users with a particular profile) would be able to see the pencil, and edit the information in that area.
Has anyone done this before? Any ideas on how to do it? JavaScript that's read when the page loads, perhaps?
I have created the following BulkApex to count the number of accounts owned by users.
This works, however it does not work for our larger account owners where it hits governor limits. To combat this i have put in a LIMIT 5000, however we have many owners with more than 5k accounts and i would like to get an accurate count.
List<User> users = new List<User>();
Set<ID> UserIDs = new Set<ID>();
for (Sobject c : scope) {
UserIDs.add(c.Id);
}
Map<ID, User> usersWithAccounts = new Map<ID, User>([select Id, Accounts_Owned__c FROM User WHERE Id in :UserIDs]);
Map<ID, Account> acctsCount = new Map<ID, Account>([select Id, OwnerID FROM Account WHERE OwnerId in :UserIDs LIMIT 5000]);
for (User acct : usersWithAccounts.values()) {
Set<ID> conIds = new Set<ID>();
for (Account con : acctsCount.values()) {
if (con.OwnerID == acct.Id)
conIds.add(con.Id);
}
acct.Accounts_Owned__c = conIds.size();
}
update usersWithAccounts.values();
}
global void finish(Database.BatchableContext BC){
}
}
I have tried to do variation on
Map<ID, Account> acctsCount = new Map<ID, Account>([select Id, OwnerID FROM Account WHERE OwnerId in :UserIDs LIMIT 5000]);
To use COUNT(), COUNT(ID) instead of the size so it will run for all users.
I have taken this script from another similar process for counting contacts on the account, so that is the basis for the way it has been contstructed, I am very new to Apex.
