Hi everyone,

I am hitting this error in a Unit Test on an org where I am converting multiple leads in bulk. The same Unit Test passes correctly if I only convert 1 Lead. But when I try to convert 50 at once, the test method does not pass and in the debug logs I found this error:

FATAL_ERROR | System.LimitException: Too many SOQL queries across namespaces: 1101

I have googled and searched but either noone has posted about this issue or my googlefu skills are lacking. I did find a lot of hits of a similar error of just hitting the limit, but this "across namespaces: 1101" is what's making me think this is another case.

If anyone has a clue what it could be or where I could look at, I'd appreciate it.

Thanks,
Nahuel
 

Hi!,

I am getting the following error when trying to complete the challenge:
There was an unexpected error while verifying this challenge. Usually this is due to some pre-existing configuration or code in the challenge Org. We recommend using a new Developer Edition (DE) to check this challenge. If you're using a new DE and seeing this error, please post to the developer forums and reference error id: RDYEMNVM

Has anyone experience this? anyone from trailhead that can let me know what that error ID means?

Thanks!,
Nahuel.

Hi!,

I am having trouble validating this challenge. I believe I have taken all the steps required, but I am still getting an error, and it is not a descriptive one for this case.


Anyone had this issue? Any clues on how to solve it? I do have created a Case under the Account for Edna Frank's Contact.

Thanks!,
Nahuel.

Hi everyone,

I am hitting this error in a Unit Test on an org where I am converting multiple leads in bulk. The same Unit Test passes correctly if I only convert 1 Lead. But when I try to convert 50 at once, the test method does not pass and in the debug logs I found this error:

FATAL_ERROR | System.LimitException: Too many SOQL queries across namespaces: 1101

I have googled and searched but either noone has posted about this issue or my googlefu skills are lacking. I did find a lot of hits of a similar error of just hitting the limit, but this "across namespaces: 1101" is what's making me think this is another case.

If anyone has a clue what it could be or where I could look at, I'd appreciate it.

Thanks,
Nahuel
 

Please help, I am getting the following errors when I run the unit test:

FATAL_ERROR System.StringException: Invalid id: 
and
FATAL_ERROR External entry point

referencing the submit method in my class.

Class:
public class ContractExtension {

    //private final Hearing_Aids__c ha;

    public final Contact con;
    public List<Hearing_Aids__c> haList {get; set;}
    public List<Hearing_Aids__c> haSelectedList {get; set;}
    public List<WrapperClass> hearingAidWrappers {get; set;}
    public Boolean hearingAidSelection {get; set;}
    public Boolean productSelection {get; set;}
    public List<SelectOption> classOptions {get; set;}
    public String classSelection {get; set;}
    

    public ContractExtension(ApexPages.StandardController stdController) {
        if (!Test.isRunningTest()) { 
        stdController.addFields(new List<String>{'Account.Id','Price_Book__c'});
        hearingAidSelection = true;
        classOptions = new List<SelectOption>();
        classOptions.add(new SelectOption('Gold','Gold'));
        classOptions.add(new SelectOption('Silver','Silver'));
        classSelection = 'Gold';
        }

        //get current contact record
        con = (Contact)stdController.getRecord();
        
        haList = [  SELECT  Id, Name, Battery__c, Class__c, Contact__c, Ear__c, Has_Accessory__c, Invoice_Date__c, Quantity__c, Opportunity__c, 
                            Is_Accessory__c, Manufacturer__c, Manufacturer_Warranty_Expiration__c, Model__c, Related_Hearing_Aid__c, 
                            Serial_Number__c, Related_Hearing_Aid__r.ID, Related_Hearing_Aid__r.Name, SKU__c
                    FROM Hearing_Aids__c 
                    WHERE Contact__c = :con.ID AND Opportunity__c = null];

        hearingAidWrappers = new List<WrapperClass>();
        for(Hearing_Aids__c ha : haList){
            hearingAidWrappers.add(new WrapperClass(ha));
        }
    }

    public void hearingAidSelectionProceed(){

        hearingAidSelection = false;
        integer i = 0;
        while (i < hearingAidWrappers.size()){
            if(hearingAidWrappers[i].associateWithNewContract == false){
                hearingAidWrappers.remove(i);
            }
            i++;
        }
        productSelection = true;
        getProductOptions();
    }

    public PageReference cancel(){
        return new PageReference('/' + con.Id);
    }

    public void getProductOptions(){
        Set<String> classSet = new Set<String>();
        
        //Put each wrapperclass into the three sets
        for(WrapperClass wc : hearingAidWrappers){
            classSet.add(wc.hearingAid.Class__c);
        }

        //query for the product2 records
        List<Product2> prodList =  [SELECT Id, Name, ProductCode, Class__c, Type__c FROM Product2 WHERE Class__c IN :classSet AND Type__c = :classSelection AND isActive = true];
    
        //Organize into Map of List of Product2 records with the id being the combination of class and tier
        Map<String,List<Product2>> prodMap = new Map<String,List<Product2>>();
        for(Product2 prod : prodList){
            if(prodMap.containsKey(prod.Class__c)){
                prodMap.get(prod.Class__c).add(prod);
            } else {
                prodMap.put(prod.Class__c, new List<Product2>{prod});
            }
        }

        //Loop through each Wrapper class again and see if you can find an existing match from the product2 map.  If so, add them all as selectoptions on the wrapper class list of select options
        for(WrapperClass wc : hearingAidWrappers){
            if(prodMap.containsKey(wc.hearingAid.Class__c)){
                for(Product2 prod : prodMap.get(wc.hearingAid.Class__c)){
                    wc.productOptions.add(new SelectOption(prod.Id, prod.Name));
                }
            }
        }
    }

    //Submit
    public PageReference submit(){
        Map<Id,PricebookEntry> pricebookEntriesMap = getPricebookEntries();

        //Create new opportunity
        Opportunity opp = new Opportunity();
        opp.AccountId = con.Account.Id;
        opp.Contact__r.Id = con.Id;
        opp.Name = 'Test Opp';
        opp.StageName = 'Closed Won';
        opp.CloseDate = System.today();
        insert opp;
        //Now that it has been inserted, we are taking the auto number field and setting it as the name
        Opportunity updatedOpp = [SELECT Id, Contract__c, AccountId, Contact__c, Name, StageName, CloseDate FROM Opportunity WHERE Id = :opp.Id];
        opp.Name = updatedOpp.Contract__c;
        update opp;
    
        insert getOlisToInsert(updatedOpp, pricebookEntriesMap);

        //create contact role on opportunity to relate to contact
        OpportunityContactRole ocr = new OpportunityContactRole();
        ocr.ContactId = con.Id;
        ocr.IsPrimary = True;
        ocr.OpportunityId = opp.Id;
        insert ocr;


        //Return to the newly created opportunity
        return new PageReference('/' + opp.Id);
    }

    /**
     * Method to ge the matching pricebookentry records in order to save the correct information on the OLI
     * @return Returns a map of Id and PricebookEntry, the Id is the Product2Id
     */
    public Map<Id,PricebookEntry> getPricebookEntries(){
        Map<Id,PricebookEntry> pricebookEntriesMap = new Map<Id,PriceBookEntry>();
        
        Set<Id> prodIdSet = new Set<Id>();
        for(WrapperClass wrapper : hearingAidWrappers){
          prodIdSet.add(wrapper.selectedProduct);
        }

        Id newLeafPricebookId = [SELECT Id FROM Pricebook2 WHERE Name = 'New Leaf' LIMIT 1].Id;
        for(PricebookEntry pbe : [SELECT Id, Pricebook2Id, Product2Id, ProductCode, UnitPrice FROM PriceBookEntry WHERE isActive = true AND Product2Id IN :prodIdSet AND Pricebook2Id = :newLeafPricebookId]){
            pricebookEntriesMap.put(pbe.Product2Id, pbe);
        }

        return pricebookEntriesMap;
    }

    /**
     * Method to return all of the newly created opportunity line items and update the hearing aids
     * @param  opp                 Parent Opp
     * @param  pricebookEntriesMap Map of pricebook entries in order to 
     * @return                     List of opportunity line items to be updated.
     */


    public List<OpportunityLineItem> getOlisToInsert (Opportunity opp, Map<Id,PricebookEntry> pricebookEntriesMap){
        List<Hearing_Aids__c> hearingAidsToUpdate = new List<Hearing_Aids__c>();
        List<OpportunityLineItem> oliListToInsert = new List<OpportunityLineItem>();
        //Create new opportunity line items (each hearing aid and accessory)
        Integer i = 1;
        
        for(WrapperClass wrapper : hearingAidWrappers){
            Boolean contractAssigned = false;
            PricebookEntry pbe = priceBookEntriesMap.get(wrapper.selectedProduct);
            OpportunityLineItem oli = new OpportunityLineItem();
            oli.OpportunityId = opp.Id;
            oli.Quantity = 1;
            oli.SKU__c = wrapper.hearingAid.SKU__c;
            oli.TotalPrice = pbe.UnitPrice;
            oli.Ear__c = wrapper.hearingAid.Ear__c;
            oli.PriceBookEntryId = pbe.Id;
            oli.Contact_related__c = wrapper.hearingAid.Contact__c;
            oli.Manufacturer__c = wrapper.hearingAid.Manufacturer__c;
            oli.Model__c = wrapper.hearingAid.Model__c;
            
            //Loop through the hearing aids and give priority to left, then right, then the accessories after that
            //Note, this will not ensure that all Left ears are 1 and Right ears are 2, becuase if we have two lefts,
            //then the first would receieve 1, and the second could receive anything after that (and after a right ear too).
            //This will work properly in the normal flow.
            if(wrapper.hearingAid.Is_Accessory__c == false && wrapper.hearingAid.Ear__c == 'Left'){
                oli.Contract__c = opp.Contract__c + '-' + i;
                i++;
            } else if(wrapper.hearingAid.Is_Accessory__c == false && wrapper.hearingAid.Ear__c == 'Right'){
                oli.Contract__c = opp.Contract__c + '-' + i;
                i++;
            } else if(wrapper.hearingAid.Is_Accessory__c == true && wrapper.hearingAid.Ear__c == 'Left'){
                oli.Contract__c = opp.Contract__c + '-' + i;
                i++;
            } else if(wrapper.hearingAid.Is_Accessory__c == true && wrapper.hearingAid.Ear__c == 'Right'){
                oli.Contract__c = opp.Contract__c + '-' + i;
                i++;
            } else {
                oli.Contract__c = opp.Contract__c + '-' + i;            
                i++;
            }

            oliListToInsert.add(oli);
            
            wrapper.hearingAid.Opportunity__c = opp.Id;
            hearingAidsToUpdate.add(wrapper.hearingAid);
        }

        update hearingAidsToUpdate;
        return oliListToInsert;

    }

    //Wrapper class to hold each instance of a hearing aid conversion to an opportunity line item.  This is also where the extra variables that need to be
    //associated with the hearing aid live.
    public class wrapperClass {
        public Hearing_Aids__c hearingAid {get; set;}
        public Boolean associateWithNewContract {get; set;}
        public List<SelectOption> productOptions {get; set;}
        public String selectedProduct {get; set;}

        public wrapperClass(Hearing_Aids__c ha){
            hearingAid = ha;
            associateWithNewContract = true;
            productOptions = new List<SelectOption>();
            selectedProduct = '';
        }
    }


}

Test: @isTest(seeAllData=true)

private class ContractExtensionTest {
    static testMethod void validateOpp() {

        Test.startTest();
        
        Account acc = new Account(Name = 'TestAccount');
        insert acc;

        Contact con = new Contact(LastName='Test',AccountId=acc.ID,RecordTypeId='0127A0000008l3I',Patient_ID__c='1234');
        insert con;
        
        
        ApexPages.StandardController setCon = new ApexPages.StandardController(con); 


        Hearing_Aids__c hal = new Hearing_Aids__c(Contact__c = con.ID, Class__c = 'TIER 1 (BAS)', Ear__c = 'Left', Manufacturer__c = 'TestManu',Model__c = 'TestModel', Serial_Number__c = '12345');
        insert hal;

        Hearing_Aids__c haa = new Hearing_Aids__c(Contact__c = con.ID, Class__c = 'Accessory', Ear__c = 'Left', Manufacturer__c = 'TestManu',Model__c = 'TestModel', Serial_Number__c = '12345');
        insert haa;
        
        ContractExtension ce = new ContractExtension(setCon);
        
        ce.hearingAidSelectionProceed();
        
        ce.getProductOptions();
        
        //ce.getPricebookEntries();
        
        ce.submit();

        List<Opportunity> opp = new List<Opportunity>([SELECT AccountId FROM Opportunity WHERE Contact__c= :con.ID AND CloseDate = Today]);
        
        List<OpportunityLineItem> oli = new List<OpportunityLineItem>([SELECT ID,Manufacturer__c,Model__c,Ear__c,Contact_related__c,OpportunityId FROM OpportunityLineItem WHERE Contact_related__c= :con.ID]);

        System.debug('debug line 1 Opp: '+opp+' Oli: '+oli);
        
        
        Opportunity opp1 = opp.get(0);
        
        OpportunityLineItem oli1 = oli.get(0);

        //update opp;

        //update oli;

        update con;

        System.debug('debug line 2 Opp: '+opp+' Oli: '+oli);
                
        System.assertEquals(hal.Manufacturer__c,oli1.Manufacturer__c);
        
        System.assertEquals(hal.Model__c,oli1.Model__c);

        System.assertEquals(hal.Ear__c,oli1.Ear__c);
        
        
    }
}

Good afternoon. I have this Visual Force which generate a .doc document. This document is not aligned properly.
How can I create a TAG or a parameter to format all the document as "center" or "justify".

<apex:page StandardController="PropostaCredito__c" extensions="CPRController" cache="true" contentType="application/msWord#msword.doc"> <!--<apex:page StandardController="PropostaCredito__c" extensions="CPRController" cache="true">--> <html xmlns:w="urn:schemas-microsoft-com:office:word"> <body> <apex:outputText value="{!documento}" escape="false"></apex:outputText> </body> </html> </apex:page>

Hi!,

I am having trouble validating this challenge. I believe I have taken all the steps required, but I am still getting an error, and it is not a descriptive one for this case.


Anyone had this issue? Any clues on how to solve it? I do have created a Case under the Account for Edna Frank's Contact.

Thanks!,
Nahuel.

Hello everyone,

I currently have a lightning application within Salesforce1 that contains multiple lightning components. The components appear past the screen, but when I try to scroll, I can see the bottom of the screen, but I get snapped back up to the top of the page. I'm having trouble figuring out why the component won't allow me to scroll down and how to fix it.

I've tried applying "slds-scrollable--y" to the div class, but that doesn't work. I've also tried adding style="overflow:scroll" as well but also to no avail.

Any help would be greatly appreciated! Thanks!

Hi
I have created a trigger but it giving me this error on Line:7.
Error:Incompatible element type Id for collection of Account
Please help.

trigger getOptyAmt on Opportunity (after insert, after update) {
    	List<Account> accntId = new List<Account> ();
    	Integer optyAmt;
    	Account accId;
    for(Opportunity opty: Trigger.new) {
        if(opty.AccountId != null) {
            accntId.add(opty.AccountId);
        }
    }
    for(Opportunity opty: [select Id from opportunity where account in: accntId]) {
        optyAmt = opty.Amount;
        accId = opty.AccountId;
        accId.Total_Opportunity_Amount__c =+ optyAmt;
    }
}

 

Hi,

In the project "Prepare the App for Local Development" (Heroku connect) i have a message saying me that the repository is empty, after trying to clone the app. Code:

 heroku git:clone -a <APP_NAME> --> Replacing APP_NAME with my app name

After execute command:
You appear to have cloned an empty repository.. But the app actually exist and form is displayed when i navigate to it.

Can anyone help me with this slightly trouble?
 

We currently use complex Conga merge documents, and then attach them to an Echosign agreeemt.  Well, now I'd like to find a way to drop the Conga documents from the process.  Document is getting even more complex, and I'm going to use visualforce and apex to create the document that is to be signed. So, ...

Can visualforce rendered as a PDF, have embedded signature tags?  

Thanks

 

I wanted to figure out if there is or if there is any plan to open challenges data via an api so that we can reward employees for completing trialhead data.

What I'm trying to do is dynamically enable and disable an apex commandButton depending on whether a checkbox is checked or unchecked. The commandButton is starting in a disabled state, and if I check the checkbox I want to enable the commandButton. What happens is that the commandButton does in fact become enabled (if I click it, the form is submitted), but visually the commandButton still appears to be disabled. However if I do the same thing with a regular input button, everything works fine -- ie the input button appears enabled when enabled and disabled when disabled.  Below is a very simple VF page that demonstrates the problem.

 

<apex:page sidebar="false"> 

<apex:form >   

<apex:pageBlock >     

<apex:pageBlockButtons id="buttonBlock" location="top">       

<apex:commandButton id="myCmdButton" value="Disabled Apex Command Button" disabled="true"/>       

<input id="myButton" type="button" value="Disabled Input Button" disabled="true"></input>       

<input id="myCheckbox" type="checkbox" onclick="cbxOnClick()">Enable Buttons</input>       

<script>           

var cmdBtn = document.getElementById('{!$Component.myCmdButton}');           

var btn = document.getElementById('myButton');           

var cbx = document.getElementById('myCheckbox');                                     

function cbxOnClick() {           

btn.disabled=!cbx.checked;               

btn.value=(cbx.checked? "Enabled Input Button":"Disabled Input Button");               

cmdBtn.disabled=!cbx.checked;               

cmdBtn.value=(cbx.checked? "Enabled Apex Command Button":"Disabled Apex Command Button");           

}                                                                                                 

</script>     

</apex:pageBlockButtons>   

</apex:pageBlock>         

</apex:form>       

</apex:page>